About Us  l  FAQs  l  Site Map  l  Language   ภาษาไทย 
 Service Center Call 0-2203-7500
หน้าหลัก Large Venue Laser DU9800Z

Large Venue
Laser DU9800Z
Brightness : 18,000 ANSI Lumens
Resolution : WUXGA (1920x1200)
Contrast Ratio : 10,000:1
Lamp Life and Type : 20,000 Hours (Laser
  Phosphor Light Engine)
3D Type : 3D-Ready
I/O Connection Ports : HDMI v.1.4*2/3G-SDI-
  in/out VGA-In, VGA-Out/
  RJ45 HDBase T
Special Feature : Edge Blending (Built –in),
  Warping (Built – in)


• Bright 18,000 ANSI lumens with a native WUXGA (1,920 x 1,200) resolution for impeciablle colors and outstanding details
• DLP® DarkChip3™ and BrilliantColor™ technologies for optimal black levels and vibrant colorful images
• Sold state laser phosphor light source for reliable projection and performance
• Environmentally friendly lamp-less design that is mercury-free and energy efficient
• Almost maintenance-free with up to 20,000 hours of operating time
• Advanced video processor for fluid video streaming and 10-bit programmable RGB color adjustments
• Laser light source produces rich colors for an incredible cincematic like movie experience
• Fine tune and optimize an image with advanced calibrations, including gamma and color management settings
• Built-in hardware edge blending and warping functionality
• Powered zoom, focus and lens shift (horizontal/vertical) for easy adjustment and positioning flexibility
• Picture-in-Picture (PIP) for simultaneously image projection from two different active sources
• Full suite of display connectivity inputs and outputs including: HDMI v1.4, DVI-D, Component (5 BNC) , VGA-In, 3G-SDI-In/Out, VGA-Out, HDBaseT™
• HDBaseT™ interface with support for distribution of digitalvideo content over standard CAT5e/6 LAN cable
• Portrait mode projection allows the projector to be easily setup and installed in a 90° installation
• 360° operation and projection design for set up in all angles
• Instantaneous power-on & off, so no need for system pre-heating and postcooling
• Airtight sealed engine and filter-less design for improved performance against fighting dust and fibers
• Frame sequential and dual channel 3D supported
• Complete range of motorized interchangeable lens in sizes from 0:84 to 7:01 (Optional)
• Optimized system layout with high efficiency cooling system
• Heavy duty steel chassis for extra strength and integrity
• 24/7 continuous operation with no downtime
• Network ready for integration and system administration via RJ45


Display Type Single Chip 0.96" DLP Technology by TI
Brightness (Typical) 18,000 ANSI Lumens
Native Resolution WUXGA (1920 x1200)
Maximum Resolution WUXGA (1920 x 1200)@60Hz
Contrast Ratio (Typical) 10,000:1
Lamp Life and Type Up to 20,000 hours (Laser Phosphor Light Engine)
Throw Ratio 1.5 - 2.0:1
Image Size (Diagonal) 40" - 500"
Projection Distance 1.24 - 21.8m (4.06ft to 71.5ft)
Projection Lens F = 2.17 – 2.65
Zoom Ratio 1.33x
Aspect Ratio 16:10
Keystone Correction Horizontal ±60°, Vertical ±40°
3D Type Yes
Video Compatibility SDTV (480i, 576i), EDTV (480p, 576p), HDTV (720p, 1080i/p), NTSC (M, 3.58/4.43 MHz), PAL (B, D, G, H, I, M, N), SECAM (B, D, G, K, K1, L)
I/O Connection Ports HDMI v1.4 (x2), DVI-D, Component (5 BNC), 3G-SDIIn/ Out, VGA-In, DisplayPort v1.2, RS-232, VGA-Out, 3D-Sync In/Out, 12v Trigger 1, 12v Trigger 2, Wired Remote, HDBaseT™, RJ45
Dimemsions (WxDxH) 681 x 530 x 248mm (26.8” x 20.8" x 9.7")
Weight Estimated 48kg (105.8lbs)
Noise Level 43dB (Normal Mode)
Price/Baht (vat) Call


File Version Language Size Date
Datasheet   ENGLISH 532 KB 5-08-2017

I/O Port Overview

Input / Output Connections



  1. The terms of this warranty applies only to prodcuts which you have purchased from ICOM TECH Co., Ltd. and authorized dealers.
  2. Products are warranted for 2 years.
  3. In case of DOA-Dead on Arrival implied that the product either
    cannot be turned on or beready in use after taking out from the
    box. Replacement new product will be made by seven-day limited
  4. This warranty doesn't cover plastic components or other
    components outside products.
  5. The following circumstances excluded from warranty coverage
    1. Defects or damage caused by operator fails to comply
      user manual instruction.
    2. Defects or damage due to insects, liquid or spills of food.
    3. Changes, repair and modify by unauthorized person or service
    4. Product damage caused by catastrophes and external
      environmental factors such as inundation, fire, earthquake,
      shipment and faulty electric power.
    5. Product damage caused by a lifetime of wear.
    6. Serial number of the product has been modified, removed,
      defaced or destroyed. For further information about products
      and services, please contact 0-2203-7500 or E-mail to

Recently Viewed: