About Us  l  FAQs  l  Site Map  l  Language   ภาษาไทย 
 Service Center Call 0-2203-7500
หน้าหลัก Large Venue Laser DU8090Z-WH

Large Venue
Laser DU8090Z-WH
Brightness : 8000 ANSI Lumens
Resolution : WUXGA (1920x1200)
Contrast Ratio : 10,000:1
Lamp Life and Type : 20,000 Hours (Laser
  phosphor Light Engine)
I/O Connection Ports : HDMI v1.4a*2
  DVI-D, 3G-SDI-In/Out
Special Feature : HDBaseT™/LAN(Shared)
: Interchangeable Lens 8
: Built-in Hardware edge
  blending and warping
: Picture-in-Picture (PIP)


• Sold state laser phosphor light source for reliable projection and performance
• Environmentally friendly lamp-less design that is mercury-free and energy efficient
• DLP® and BrilliantColor™ technologies for high-performance projection
• 8,000 ANSI lumens with a dynamic 10,000:1 contrast ratio for an amazing image quality
• Almost maintenance-free with up to 20,000 hours of operating time
• Native WUXGA resolution with a maximum WUXGA resolution
• Built-in hardware edge blending and warping functionality
• Powered zoom, focus and lens shift (horizontal/vertical) for easy adjustment and positioning flexibility
• Lens Positioning Memory (LPS) for quick recall of user defined lens positions (focus, zoom and lens shift)
• Picture-in-Picture (PIP) for simultaneously image projection from two different active sources
• Full suite of display connectivity inputs and outputs including: HDMI v1.4a, DVI-D, Component (5 BNC) , VGA-In, 3G-SDI-In/Out, VGA-Out, HDBaseT™
• HDBaseT™ interface with support for distribution of digital HD video content over standard CAT5e/6 LAN cable
• 3D compatibility with DLP® Link™ and HDMI 1.4 technology support (Bluray, side by side, frame packing, top and bottom) for dazzling and realistic life-like images
• Portrait mode projection allows the projector to be easily setup and installed in a 90° installation
• 360° operation and projection design for set up in all angles
• Crestron® RoomView™ integration for network monitoring and management
• Eight (8) interchangeable lens options with quick touch lens release design for easy lens removal and reinstallation
• Instantaneous power-on & off, so no need for system pre-heating and postcooling
• Airtight sealed engine and filter-less design for improved performance against fighting dust and fibers
• Optimized system layout with high efficiency cooling system
• 24/7 continuous operation with no downtime
• Network ready for integration and system administration via RJ45


Display Type Single Chip 0.67" DLP Technology by TI
Brightness (Typical) 8000 ANSI Lumens
Native Resolution WUXGA (1920x1200)
Maximum Resolution WUXGA (1920x1200)@60Hz (Reduced Blanking)
Contrast Ratio (Typical) 10,000:1
Lamp Life and Type Up to 20,000 hours (Laser Phosphor Light Engine)
Throw Ratio 1.73 - 2.27:1
Image Size (Diagonal) 40" - 500"
Projection Distance 1.45 - 24.85m (4.77ft to 81.52ft)
Projection Lens F = 1.7 - 1.9, f = 26 - 34mm
Zoom Ratio 1.3x
Aspect Ratio 16:10
Keystone Correction Horizontal ±60°, Vertical ±40°
3D Type Yes (DLP® Link™, HDMI v1.4 (Blu-ray, side by side, frame packing, top and bottom))
Speakers N/A
Video Compatibility SDTV (480i, 576i), EDTV (480p, 576p), HDTV (720p, 1080i/p) NTSC (M, 3.58/4.43 MHz), PAL (B, D, G, H, I, M, N), SECAM (B, D, G, K, K1, L)
I/O Connection Ports HDMI v1.4a (x2) DVI-D, Component (5 BNC), VGAIn, 3G-SDI-In/Out, RS-232, VGA-Out, 3D-Sync In/Out, 12v Trigger, Wired Remote, HDBaseT™/LAN (Shared)
Dimemsions (WxDxH) 500 x 580 x 205mm (19.7" x 22.8" x 8.1")
Weight 28kg (61.7lbs)
Noise Level 40dB (Normal Mode)
Price/Baht (vat) Call


File Version Language Size Date
Datasheet   ENGLISH 371 KB 21-03-2016

I/O Port Overview

Input / Output Connections



  1. The terms of this warranty applies only to prodcuts which you have purchased from ICOM TECH Co., Ltd. and authorized dealers.
  2. Products are warranted for 3 years. Laser module which embeded
    with products are warranted 10,000 hours.
  3. In case of DOA-Dead on Arrival implied that the product either
    cannot be turned on or beready in use after taking out from the
    box. Replacement new product will be made by seven-day limited
  4. This warranty doesn't cover plastic components or other
    components outside products.
  5. The following circumstances excluded from warranty coverage
    1. Defects or damage caused by operator fails to comply
      user manual instruction.
    2. Defects or damage due to insects, liquid or spills of food.
    3. Changes, repair and modify by unauthorized person or service
    4. Product damage caused by catastrophes and external
      environmental factors such as inundation, fire, earthquake,
      shipment and faulty electric power.
    5. Product damage caused by a lifetime of wear.
    6. Serial number of the product has been modified, removed,
      defaced or destroyed. For further information about products
      and services, please contact 0-2203-7500 or E-mail to

Recently Viewed: